Description
Artificial Grass Glue: All-Weather, Strong-Bond Adhesive 5.5kg, Green.
Our Multi-Purpose Wet-Fix Fake Grass Glue Adhesive is a professional-grade, two-part polyurethane adhesive designed to securely bond artificial grass to seam joining tapes. This powerful adhesive ensures a strong, invisible joint, even in challenging weather conditions.
Key Features:
- All-Weather Performance: Apply in damp or wet conditions.
- Rapid Set: Accelerate curing time with our ‘Rapid Set’ additive.
- Low-Temperature Application: Install in cold weather, down to near-freezing temperatures.
- Durable Bond: Maintains strength and resists expansion in wet environments.
- Easy Application: Smooth, even spread for efficient installation.
- Extended Installation Season: Work beyond traditional seasons and weather limitations.
Envirostik Wet-Fix
Envirostik Wet-Fix is a 2-component polyurethane-based adhesive system, specially formulated for seam bonding of artificial grass for sports surfaces, leisure, and landscaping installations. The formulation allows installation in adverse weather conditions and with the addition of Envirostik Rapid Set Accelerator, can also be used in low winter temperatures, as low as 3°C to 5°C.
Mixing:
The adhesive and pre-measured hardener components must be mixed prior to application. Pour the hardener liquid into the adhesive in the plastic tub at a ratio of 10:1 by weight as supplied. Mix using a drill mixer ensuring that the two components are thoroughly dispersed. Please note that any poorly mixed adhesive will not cure correctly. When using at low temperatures a faster cure speed can be obtained with the addition of Envirostik Rapid Set Accelerator. For instructions, please see the accelerator packaging.
Application:
Wet-Fix Adhesive is suitable for use in adverse weather conditions and will still form strong bonds even if the materials become rain-affected during installation. NB: The backing on carpets can vary. Some respond well to dampening, others are difficult to bond. It is important to assess the suitability of the carpet for bonding in wet conditions. Preferably using the Envirostik Seam-Rite application machine, spread the adhesive into the recommended seam joining tape. The notched tray spreads the adhesive to the adhesive across the width of the tape. Allow a minimum of 12cm to 3cm strip uncoated to be bonded into the adhesive to fill the gaps between the rows of stitches. The seam can be lightly rolled after the carpet is applied to transfer sufficient adhesive into the joint and subsequently re-rolled when the adhesive is setting to a high viscosity and subsequently re-rolled when the adhesive is setting to a high viscosity and smooth appearance (normally 1 to 2 hours after mixing).
Good Practice:
- Ensure full contact with the entire carpet backing with the adhesive.
- Ensure the adhesive is fully mixed
- Avoid contact with skin and eyes
- Use in well-ventilated areas
If you have any questions, please consult the Safety Data Sheet.
Find out more about Artificial Grass and its benefits here